Spot Solver- Animal Stains

Act Quickly! Delaying may cause nthe spill tp become a permant stain. Blot liquids with a dry, white absorbent cloth or white paper towels. Gently scrape up semi-solids with a rounded spoon. Break up solids and vacuum.

* Pretest any spot removal solution (for color transfer to the cloth or damage to the carpet) in an inconspicuous area. If a change occurs, select another solution.

* Apply a small amount of the solution to a white cloth, and work in gently - do not rub -- working from the edges of the spill to the center to prevent spreading. Allow to remain on the spill a few minutes. Be patient. Blot.

* Continue to use the first agent as long as there is a transfer of the spill to the cloth. Be patient. Complete removal may require repeating the same step several times. Or, you may need to move to the next solution.

* When the spill is completely removed, rinse the area with cold water; blot with a dry cloth until all moisture is removed.

A dry, absorbent, cleaning compound may be used as a substitute to minimize drying time.

Detergent Solution - Mix one fourth (1/4) teaspoon of a liquid dishwashing detergent per one (1) cup of lukewarm water. NEVER USE A STRONGER CONCENTRATION! Thorough rinsing is necessary to remove detergent residues that may cause rapid soiling. It may be necessary to rinse with warm water several times to completely remove residues. (See Residue Precautions.) Care should be used in selecting a detergent. Never use a laundry detergent of any type, because laundry detergents may contain optical brighteners (fluorescent dyes) that dye the fiber. Do not select an automatic dishwashing detergent because many contain bleaching agents that destroy dyes and some fibers.
 Vinegar Solution - Mix one (1) cup of white vinegar per two (2) cups of water. White vinegar is a 5% acetic acid solution. It is used most often to lower the alkalinity caused by detergent solutions or alkaline spills.

 Warm Water - Lukewarm tap water should be used in most cases to rinse the cleaning solutions from the fiber. Failure to completely rinse the solutions from the fiber may cause accelerated soiling.

 Ammonia Solution - Mix one (1) tablespoon of household ammonia per cup of water. Please note: Be aware that ammonia, if used improperly, can cause a color change. Be sure to test a hidden area.

Call a Professional - Professional cleaners have the ability and the equipment to use more aggressive cleaning solutions to remove stubborn spills. Always consider consulting a professional cleaner regarding any spot removal question.
                                                                  

Courtsey of : The Carpet and Rug Institute

Troubleshooting Common Carpet Issues

Information for Maintaining Carpet Appearance...

>Texture surface retention:

Carpet in heavily traveled areas receives the most wear. For better appearance and longer carpet life, try to reduce the amount of traffic on these areas or use small rugs in front of heavily used chairs or furniture. Remove and clean these rugs while vacuuming the primary carpet or rug. You should occasionally move furniture and reverse area rugs. Although some change will eventually occur in the texture of your carpet, reducing the wear on paths and in front of furniture will slow this change.

>Crushing:

Crushing is the loss of pile thickness because of foot traffic. Crushing is not considered a manufacturing defect unless it is specifically cited in the manufacturer’s warranty. Regular vacuuming may help reduce crushing that results from traffic. Manufacturers’ definitions of crushing may vary.

>Depressions or indentations:

The weight of heavy pieces of furniture can cause indentations in carpet. Some depressions may be permanent. Use furniture glides or cups under the legs of heavy pieces, or move your furniture a few inches backward or sideways so that the weight is not concentrated in one place. To remedy depressions, work the carpet pile back into place with your fingertips or the edge of a spoon, then, dampen the area and heat it with a hair dryer, working the fibers with your fingers or a spoon.

>Fading or color loss:

Give your carpet the normal protection from direct sunlight that you would give to any colored fabric. Emissions from heating systems or chemicals, such as pesticides, household cleaning agents and other household items, can also result in color loss.

>Filtration soil:

Filtration soil may appear as dark or grayish lines on carpet along walls, stairways and under doors. It is caused by airflow over and through carpet, allowing fine soils to settle on the surface. It is often caused by an improperly balanced ventilation system, when the volume of air entering a room exceeds the system’s capacity to remove air from the room. Excess air then seeks exit sources in gaps along walls and stairways. Prevent the airflow through carpet and carpet edges by sealing openings through the carpet and under doors and baseboards. Keeping the air in the area clean and using good filtration in your heating and cooling systems and vacuum cleaners can help. Filtration soils may require special cleaning treatment for effective removal. Contact a carpet-cleaning professional for assistance.
                                                                 

> Courtesy of The Carpet and Cleaning Institute

Clearing The Air

Asthma and allergies: Although we might not normally associate carpet with improved indoor air quality, it does have a very positive effect. Gravity causes common household particles, such as dust, pollen and pet and insect dander, to fall to the floor. Carpet fibers trap the particles, reducing their continued circulation in the air. Proper cleaning with CRI-approved vacuums effectively removes dust and allergens from the carpet, locks them in the machine and helps keep them out of the air we breathe.

A misperception is that people with asthma and allergies should avoid carpet in the home. But much of today’s carpet is made from harmless materials found in clothing and other everyday fabrics, such as polyester, nylon, triexta, and olefin fibers, which don’t trouble most people.

Mold and VOC misperceptions: Other misperceptions about carpet involve mold and the emission of volatile organic compounds, or VOCs. In fact, it is very hard to grow mold on carpet. Mold grows in any moist environment where dirt and dust provide nutrients. When carpet is kept clean and dry, mold simply cannot grow on synthetic fibers.

Carpet is also wrongly linked to high VOC levels. Scientific studies show that new carpet is one of the lowest emitters of VOCs into the indoor environment, and that these emissions dissipate very quickly. The low-level VOC emissions and the harmless odor from new carpet disappear within the first 48 to 72 hours after installation and even sooner with open windows or doors.

The Carpet and Rug Institute offers Green Label testing and certification to indicate carpet, carpet backings, cushions and adhesives that emit low VOCs.

                                                                         ~ Courtsey of The Carpet and Rug Institute

Caring For Your Carpet

1. The Virtues of Vacuuming:

The carpeting in your home is the perfect place for dirt, dust and other potentially harmful particles to hide. Vacuum the carpet in your home at least once per week, more frequently in high traffic areas like your family room or entrance way. By vacuuming on a regular basis, the life of your carpet is extended by preventing the dirt and particle build-up that wears down carpet fibers. For hard to reach places like underneath furniture and around baseboards, use your vacuum’s attachments every few weeks.

 

2. Slow Down and Sweep it All Out:

Even though your carpeting may not appear to be dirty, remember that millions of dirt and dust particles can be hiding deep within the carpet fibers. Many people vacuum too fast to really collect all of the dirt collected in their carpeting. Slow down a bit, and you’ll be able to sweep up a lot more of the particles that are hidden from the naked eye. It won’t take much extra time, but your carpets will look better and wear longer.

 

3. Crisscross Your Way to Cleaner Carpeting

High traffic areas where people sit and move their feet are some of the most important places to vacuum thoroughly. Go over these places a few times using a crisscross pattern to ensure that your carpet is really getting clean.

 

4. Fight the Dirt Before it Starts:

Whether you’re getting new carpet or just had your existing carpets cleaned, consider using soil retardants to keep your entire home looking pristine. While this can be done on your own, we recommend using professional equipment or having a qualified company apply the soil retardants for you. Soil retardants act like a shield against dirt and dust particles that will protect them for years to come.

Courtesy of: Clean Home Ideas

 

Upholstery Cleaning Tips

The easiest upholstery stains to clean are those that are treated while they are still fresh. The hardest to clean are grease and oil. Any very large stain may be best left to a professional. Some tips on increasing your chance of successful results:    1. Moisture is not your friend. Use as little water as possible to clean upholstery. Try a spot remover first, but if you must use a water-based approach, use it sparingly for best results.    2. Upholstery sprays are inexpensive and often work well on organic stains, but they are ineffective on grease or oil.    3. Baby wipes are surprisingly effective for cleaning upholstery because they deliver the right amount of soap and water, are quite gentle, and evaporate quickly.    4. Coffee Stains: Combine a small amount of dish detergent, water and vinegar and dab sparingly until coffee disappears.    5. Mold or mildew: Mix a quarter cup of hydrogen peroxide and a quarter teaspoon of color safe bleach. Lightly rub the stain with a clean cloth dipped in the solution. Rub area with fresh water applied sparingly and let dry.    6.)Stubborn Stains:     >CRAYON: Try using non-gel toothpaste to remove crayon marks from water-safe upholstery. Rub it gently on the surface, a small section at a time, then wipe off with a damp cloth. >GREASE OR OIL: Sprinkle salt, cornstarch or talcum powder on the spot as soon as you discover it. Rub in carefully, allow grease to lift off upholstery and absorb into spot remover. Brush off grease and powder and wipe with a damp cloth. Did you know you can reduce overall grime and soiling of your upholstered furniture by vacuuming it regularly? Special upholstery attachments for your vacuum system can make it easy to reach small corners and creases, and are safe for use on fabrics. Vacuum furniture at least every two months, or weekly if you have pets or allergies.   Courtesy Of:http://www.cleanhomeideas.com/tips_upholstery.html

.

Simple methods for special carpet problems

Ever wondered how to fix carpeting that has been burned,stained or discolored? Try one of these simple methods to restore your carpet to its former glory.

> If you used a spot remover that altered the color of your carpet, try using artists' acrylic paint to touch up the affected area. Or, you can use a felt-tip marker or a permanent-ink marker of the appropriate color.

> To repair a small burned area, snip off the charred fibers and put white glue in the opening. Then snip fibers from a scrap piece of carpet or from an inconspicuous part of the carpet. When the glue gets tacky, poke the fibers into place.

> To repair a large carpet burn, simply cut out the damaged area and subsitute a patch of identical size and shape securing the piece with latex adhesive.

> If a carpet thread is loose, snip it level with the pile. Do not pull on it as you will run the risk if unraveling part of the carpet.

                                                                                                      Editors of Consumer Guide
                                                                                                      TLC Home

Frequently Asked Questions...

How long do I have to wait until my carpets are dry?

Your carpets should be dry within 4-6 hours, however, factors such as humidity, temperature and the flow of air can extend the drying time. To help accelerate the drying time, use fans or turn on your air conditioner or heating system. Please remember to keep the protective blocks under your furniture until your carpet is completely dry to avoid any color transfer.

How can I keep my carpet looking fresh after cleaning?

Regular vacuuming will help your carpet stay clean and fresh. We recommend that your carpets be professionally cleaned twice a year.

Why should I use a stain protectant?

Most carpets come from the manufacturer with stain protection, but that reduces in effectiveness over time. CarpetUp’s 3M Scotch Guard protectant refreshes the performance of stain resistant carpets and can help your carpet resist soiling from dirt, oil and water based spills. The protectant also will give you more time to remove spills before staining can occur.

Do you move furniture?

Yes, we do move furniture. It would be helpful to us if you removed any items on tables, etc. to a secure location. We suggest it is not feasible to move such large items as pianos, big screen televisions, waterbeds, dressers with attached mirrors, china cabinets and the like.

Do I need to vacuum my carpets before the professionals arrive?

There is no need to vacuum before we arrive. If needed, our technicians can pre-vacuum the area that needs to be cleaned.

Do you guarantee the removal of all stains on my carpets?

While we would like to say yes, the reality is that there are some substances that can permanently discolor fabric fibers.

Do you have a customer satisfaction guarantee?

Yes, all our work comes with a 100% satisfaction guarantee. If you are unhappy with any part of our work, simply call us with 24 hours and we will return to address those areas of concern at no cost to you.