Wednesday, April 22, 2015
Thursday, July 24, 2014
The Secret to Cleaning Grout
The secret to cleaning grout is Oxygen bleach.Oxygen bleach is nontoxic, doesn't produce harsh fumes, and is color- and fabric-safe. It removes all food and grease stains with no or minimal scrubbing. The oxygen ions attack the stain molecules, breaking them into pieces that rinse away with little effort.
To clean floor tiles, mix any high-quality oxygen bleach with warm water and stir it until it dissolves. Then pour the solution onto the floor tile so the grout lines are flooded with the solution. It's best to apply the oxygen-bleach solution to dry grout so it soaks deeply. Let the solution sit on the grout for at least 15 minutes. If it completely soaks into the grout, add more solution, making sure there is always plenty of the cleaning liquid on the grout.
The longer you let the solution sit on the grout, the less work you have to do cleaning tile flooring. The oxygen ions work for up to six hours. To get maximum cleaning results, it helps to scrub the grout lightly after 30 minutes. Always pour new solution onto the grout as you scrub.
An oxygen bleach solution will remove red wine stains in minutes. Beet juice is not a problem. I've not discovered one stain it can't remove. Friends have tried the tile cleaning machines, but they say the oxygen bleach does a much better job. You have to always scrub a little, but that's how anything gets clean.
Once you have clean floor tiles, you can keep the grout looking like new by adding oxygen bleach powder to your mop water. Apply a liberal amount of mop water to the floor, scrubbing the tile surface with the mop. But leave the mop water in the grout joints without rinsing the floor. The oxygen ions clean the light dirt in the grout without scrubbing. Come back 30 minutes later and rinse the floor with clean water. If you do this each time, you'll never be on your hands and knees again with a scrub brush.
It's always best to work on stains while they're fresh, if at all possible. But tile floors that have been dirty for years will come clean in no time if you use oxygen bleach.

Courtesy Of: Tim Carter The Washington Post
To clean floor tiles, mix any high-quality oxygen bleach with warm water and stir it until it dissolves. Then pour the solution onto the floor tile so the grout lines are flooded with the solution. It's best to apply the oxygen-bleach solution to dry grout so it soaks deeply. Let the solution sit on the grout for at least 15 minutes. If it completely soaks into the grout, add more solution, making sure there is always plenty of the cleaning liquid on the grout.
The longer you let the solution sit on the grout, the less work you have to do cleaning tile flooring. The oxygen ions work for up to six hours. To get maximum cleaning results, it helps to scrub the grout lightly after 30 minutes. Always pour new solution onto the grout as you scrub.
An oxygen bleach solution will remove red wine stains in minutes. Beet juice is not a problem. I've not discovered one stain it can't remove. Friends have tried the tile cleaning machines, but they say the oxygen bleach does a much better job. You have to always scrub a little, but that's how anything gets clean.
Once you have clean floor tiles, you can keep the grout looking like new by adding oxygen bleach powder to your mop water. Apply a liberal amount of mop water to the floor, scrubbing the tile surface with the mop. But leave the mop water in the grout joints without rinsing the floor. The oxygen ions clean the light dirt in the grout without scrubbing. Come back 30 minutes later and rinse the floor with clean water. If you do this each time, you'll never be on your hands and knees again with a scrub brush.
It's always best to work on stains while they're fresh, if at all possible. But tile floors that have been dirty for years will come clean in no time if you use oxygen bleach.

Courtesy Of: Tim Carter The Washington Post
Wednesday, April 23, 2014
Spring Cleaning Tips
It’s that time of year again: Time to scour the Internet for spring cleaning tips as fresh as we want our homes to be – and in my case, my carpets are looking a little dull. (Okay, a lot dull.) Keeping carpets clean and stain free is a challenge, especially in high traffic areas that become the stomping ground for winter’s mix of slush and sand.
Before you know it, your carpets are shades darker than they were just one season ago. Here are my favorite natural spring cleaning tips to liven up your carpeting:
One of the coolest spring cleaning tips I came across last year helped me remove stains I thought I was stuck with forever – and all you need is an iron.
Who knows? After taking these spring cleaning tips for a spin, you might even enjoy cleaning your carpets! (Okay, that’s probably a stretch.)

Courtesy of: Organic Authority
Before you know it, your carpets are shades darker than they were just one season ago. Here are my favorite natural spring cleaning tips to liven up your carpeting:
1.) Always vacuum first
It is important to vacuum regularly which keeps deeply embedded dirt, sand and dander to a minimum. Use the changing seasons to do a thorough, detailed vacuum of the nooks and crannies: Under furniture, around furniture legs and across your baseboards.2.) Get rid of stains
While we all do our best to deal with carpet stains as they happen, there are always those pesky spots we didn’t have time to tackle or that take several treatments.One of the coolest spring cleaning tips I came across last year helped me remove stains I thought I was stuck with forever – and all you need is an iron.
- Throw a solution of 1 part vinegar and 2 parts water into a spray bottle and spray the stain.
- Place a damp rag on top of the spot.
- With your iron on the steam setting, iron the rag for about 30 seconds.
- Voila!
3.) Bust out the steam cleaner
Mix equal parts water and vinegar and add to your steam cleaner just like you would any cleaning solution. Add a few drops of your favorite oil if you’re concerned your carpet’s going to smell like salad dressing. For high traffic areas that need more power, use a higher ratio of vinegar to water.4.) Keep your carpets fresh
Between deep cleans, you can prolong the freshness of your carpet by creating your own carpet freshener. Mix the below ingredients and store in a shaker:- 1 cup of baking soda
- 10-20 drops of your favorite essential oil
- If you have pets, add ½ cup of borax to keep fleas at bay
Who knows? After taking these spring cleaning tips for a spin, you might even enjoy cleaning your carpets! (Okay, that’s probably a stretch.)

Courtesy of: Organic Authority
Thursday, April 3, 2014
Allergies and Carpets- The Facts
Health professionals sometimes recommend that allergy and asthma patients remove carpet from their homes. But those recommendations are generally based on faulty assumptions. In fact, clean, dry, well-maintained carpet actually improves air quality.
Carpet acts as a trap for airborne particles grounded through natural gravity.
Professional Testing Labs studied the distribution of airborne dust associated with normal activities on hard and soft flooring surfaces. Their findings showed that walking on hard surfaces disturbed more particles. These particles became airborne and entered the breathing zone. In contrast, carpeted surfaces trapped more particles so that walking disturbed fewer particles. Result: less dust in the breathing zone over carpeted floors.
Here are two articles that provide more information on the relationship between carpet and allergy symptoms:
1.) Click here to learn about the Swedish study that showed an increase in allergy cases as carpet use declined.
2.) Click here to read the results of a Solutia study on airborne allergens.

Courtesy of: The Carpet and Rug Institute
Carpet acts as a trap for airborne particles grounded through natural gravity.
Professional Testing Labs studied the distribution of airborne dust associated with normal activities on hard and soft flooring surfaces. Their findings showed that walking on hard surfaces disturbed more particles. These particles became airborne and entered the breathing zone. In contrast, carpeted surfaces trapped more particles so that walking disturbed fewer particles. Result: less dust in the breathing zone over carpeted floors.
Here are two articles that provide more information on the relationship between carpet and allergy symptoms:
1.) Click here to learn about the Swedish study that showed an increase in allergy cases as carpet use declined.
2.) Click here to read the results of a Solutia study on airborne allergens.

Courtesy of: The Carpet and Rug Institute
Friday, March 28, 2014
Carpeting Pet Owners Have Been Waiting For
We've always had pets, and while we love them, they can be incredibly frustrating to clean up after *especially on carpeting. And surely we are not the only ones who knows this plight. In fact, the American Pet Product Association found that more homes in America have pets than children. That’s a whole lot of carpet damage just waiting to happen.
But there may be hope: Stainmaster has introduced a new PetProtect carpet system, designed especially for cat and dog owners. Stain master touts the line as taking on pet messes in three smart ways.
First, unlike many carpets, PetProtect builds dye and stain-resistance directly into the fibers, which means you can scrub and scrub (because, as pet owners know, accidents and muddy paws do happen) without fading your rug or diminishing its resistance to stains.
The new carpeting is also designed to reduce pet hair cling, making it easier to vacuum away.
And finally, the carpet cushion has a moisture barrier that keeps pet accidents (or any other spills) from penetrating the padding and subfloors. This could be big for those of you housetraining a puppy: no more hidden stains that cause lingering odors.
PetProtect carpet comes with a lifetime warranty, is available in many styles and colors, and typically retails for $2 to $7 per square foot.

Courtesy Of: Lexie Sachs * Good Housekeeping
But there may be hope: Stainmaster has introduced a new PetProtect carpet system, designed especially for cat and dog owners. Stain master touts the line as taking on pet messes in three smart ways.
First, unlike many carpets, PetProtect builds dye and stain-resistance directly into the fibers, which means you can scrub and scrub (because, as pet owners know, accidents and muddy paws do happen) without fading your rug or diminishing its resistance to stains.
The new carpeting is also designed to reduce pet hair cling, making it easier to vacuum away.
And finally, the carpet cushion has a moisture barrier that keeps pet accidents (or any other spills) from penetrating the padding and subfloors. This could be big for those of you housetraining a puppy: no more hidden stains that cause lingering odors.
PetProtect carpet comes with a lifetime warranty, is available in many styles and colors, and typically retails for $2 to $7 per square foot.

Courtesy Of: Lexie Sachs * Good Housekeeping
Tuesday, February 4, 2014
What Kind of Rugs are Good for High Traffic Areas?
Most well-made wool rugs are quite durable, so you have many options. But there are some types of rugs that are not well suited to high-traffic areas. Graham Head, vice chairman of ABC Carpet & Home, recommends steering clear of sisal and other natural materials like sea grass. “Those are not hard-wearing materials,” he said. “They will absorb any water spills and deteriorate.”You should also avoid silk, which is not durable, and shaggy carpets, which “will lay flat and wear out because you’re walking on the side of the pile and not the top,” Mr. Head said.
Most wool rugs will hold up well for a relatively long time, but there is a simple step you can take to extend their lifespan. “The critical thing is to put a pad underneath,” Mr. Head said. Most rugs do not wear out from the top, but from the bottom, where the knots rub against the floor. A pad “works as a shock absorber,” he said, keeping the knots away from hard surfaces and holding the rug in place.
Color and pattern are also important considerations. There is no point in buying a long-lasting rug if it is going to be stained by foot traffic. That means no whites or creams and no dark solid colors (think of how quickly a car with black paint appears to get dirty). Your best bet is to go with a hue somewhere in between. Search out either a solid that has specks of color in it or something with a pattern that will camouflage pet hair, spills and dirt.
Courtesy of : Tom McKEOUGH NY Times 2014
Most wool rugs will hold up well for a relatively long time, but there is a simple step you can take to extend their lifespan. “The critical thing is to put a pad underneath,” Mr. Head said. Most rugs do not wear out from the top, but from the bottom, where the knots rub against the floor. A pad “works as a shock absorber,” he said, keeping the knots away from hard surfaces and holding the rug in place.
Color and pattern are also important considerations. There is no point in buying a long-lasting rug if it is going to be stained by foot traffic. That means no whites or creams and no dark solid colors (think of how quickly a car with black paint appears to get dirty). Your best bet is to go with a hue somewhere in between. Search out either a solid that has specks of color in it or something with a pattern that will camouflage pet hair, spills and dirt.
Courtesy of : Tom McKEOUGH NY Times 2014
Tuesday, January 14, 2014
Do Carpets Help to Improve Indoor Air Quality?
Carpet can be wrongly blamed for contributing to asthma and allergy and for
emitting high levels of volatile organic compounds (VOCs). Studies have shown
that carpet is better at trapping allergens than hard surface, such as tile or
hardwood, because carpet fibers catch particles and allergens that fall to
floor. When allergens are trapped in the carpet, they cannot circulate in the
air for you to breathe. Proper cleaning effectively sucks up the dirt and dust from the carpet,
locks it in the machine and keeps it out of the air.
New carpet may also have a “new carpet smell.” Scientific studies show that new carpet is one of the lowest emitters of VOCs into the indoor environment. In fact, carpet emits less VOCs than other products such as paint. Further, these emissions clear very quickly. The low-level VOC emissions and the harmless odor from new carpet dissipate within the first 48 to 72 hours after installation — even sooner with open windows or doors.
So if you are concerned about asthma, allergies or VOCs, be sure to ask about Green Label and Green Label Plus carpet, cushion and adhesive options.

Courtesy of: The Carpet and Rug Institute
New carpet may also have a “new carpet smell.” Scientific studies show that new carpet is one of the lowest emitters of VOCs into the indoor environment. In fact, carpet emits less VOCs than other products such as paint. Further, these emissions clear very quickly. The low-level VOC emissions and the harmless odor from new carpet dissipate within the first 48 to 72 hours after installation — even sooner with open windows or doors.
So if you are concerned about asthma, allergies or VOCs, be sure to ask about Green Label and Green Label Plus carpet, cushion and adhesive options.

Courtesy of: The Carpet and Rug Institute
Wednesday, December 4, 2013
Have You Checked Your Carpet Warranty?
Did you know that your carpet warranty requires you to do certain things?
For instance, Home Depot limited warranties require you to have your carpet cleaned every 12-18 months using the hot water extraction method (such as the one used by CarpetUp).
They also recommend that you vacuum at least twice a week.
Stain and Soil Warranties can be even more specific, since coverage is limited to certain items that can cause the stain, and often exclude non-food and non-beverage items, for instance. Even here, many items that have strong dyes such as coffee, curry, mustard, and herbal tea are also not covered under soil and stain warranties. Be aware that bodily fluids are also typically excluded.
If you have a tough stain to get out or a carpet under warranty, call the professionals at CarpetUp to make sure you can get the longest life for your carpet!
Warranty information: Courtesy of Commercial Steam Team
For instance, Home Depot limited warranties require you to have your carpet cleaned every 12-18 months using the hot water extraction method (such as the one used by CarpetUp).
They also recommend that you vacuum at least twice a week.
Stain and Soil Warranties can be even more specific, since coverage is limited to certain items that can cause the stain, and often exclude non-food and non-beverage items, for instance. Even here, many items that have strong dyes such as coffee, curry, mustard, and herbal tea are also not covered under soil and stain warranties. Be aware that bodily fluids are also typically excluded.
If you have a tough stain to get out or a carpet under warranty, call the professionals at CarpetUp to make sure you can get the longest life for your carpet!
Warranty information: Courtesy of Commercial Steam Team
Monday, October 7, 2013
Myths and Facts About Carpet Cleaning
| "The carpet doesn't look dirty enough to have it cleaned at this time." | Some carpets do hide soil more than others. It does not mean there is no soil to be removed. All soil, whether hidden or not, acts an abrasive. It can result in early wear, loss of fiber protection, and even some loss of color. | |
| "I was told to wait a few years before having my carpets cleaned. 'They' said, once you have them cleaned, you always have to have them cleaned!" | Check your paperwork. Carpet manufacturers recommend having your carpets cleaned by a trained and qualified professional every 12 to 18 months. Call the manufacturer, not the retailer, they will refer to an IICRC Certified Firm, such as CARPETS ETC. The problem many consumers face is the fact that many companies use a high-residual detergent that remains in the carpet long after they leave, and it continues to attract soil, causing your carpets to get dirty fast. | |
| "They said Steam-Cleaning will ruin my carpets!" | Many carpet cleaning companies use Hot-Water Extraction (Steam-Cleaning). Steam-Cleaning is the preferred choice that CARPETS ETC. chooses because of the thoroughness of the method, only when done properly. It is recommended by the leading carpet manufacturers. On the other hand, untrained and uneducated carpet cleaners can over-wet your carpet creating a variety of problems for you. According to IICRC Standards, carpets should be fully dry within 24 hours. | |
| "I was told that once I have my carpets cleaned, I do not need to have any carpet protectant applied. It has built-in stain resistance." | Most of the residential installation of carpet these days are stain resist. But no carpet is ever "stain-proof", but added carpet protectants, when properly applied, will enhance stain resistance to accidental spills and spots. It will also help remove more dry soil during vacuuming. | |
| "I shouldn't have to pay a lot for carpet cleaning." | Never select a carpet cleaning company solely based on price. Carpet cleaning is not as cheap as some would like for you to think. Their technique is to advertise a low price to get you to call them, so they can push their low quality, ineffective goods at higher prices than what the real professionals charge. Thorough carpet cleaning is not cheap, but it will extend the useful life of your investment and care for your carpeting in a way that will save you money in the long run. ![]()
Courtesy of Carpets Etc. 412-221-8851
|
Wednesday, August 21, 2013
What is Green Cleaning?
Originally “green” meant the ingredients in cleaners were derived from plants and biodegraded easily after joining our waste streams (e.g. water treatment plants). To the everyday person cleaning their home, “Green” simply means something better for the environment.
So what is “Green Cleaning?” It is taking all the “yellow” and “blue” nuances of the chemistry, processing, packaging and disposal that go into creating and using a cleaning product and balancing them for environmentally safe and efficient cleaning. Green Cleaning is the commitment to make, use and dispose of cleaners with People, the Environment and Sustainability in mind.
Is Green More Clean? A cleaning product that does not clean well is not good for the environment. Producing and packaging a useless cleaning product is a waste of time and energy, which is very “un-green.” The good news is that environmental groups, state legislators, the EPA, and the cleaning products industry are all working together to improve the products that you use every day. Although Green Cleaning has only been fashionable for the last decade or so, we have been working on developing more environmentally-sound cleaning products for more than 50 years.
The cleaning products industry has understood the importance of biodegradable cleaning products since the 1950s. In the 1970s, the industry removed all CFCs from aerosols. In the 1990s, products became more concentrated (“ultras”) which reduced packaging. Cleaning products have been getting “greener” through innovation and continuous improvement – long before the “green” movement was even around!
So what is “Green Cleaning?” It is taking all the “yellow” and “blue” nuances of the chemistry, processing, packaging and disposal that go into creating and using a cleaning product and balancing them for environmentally safe and efficient cleaning. Green Cleaning is the commitment to make, use and dispose of cleaners with People, the Environment and Sustainability in mind.
Is Green More Clean? A cleaning product that does not clean well is not good for the environment. Producing and packaging a useless cleaning product is a waste of time and energy, which is very “un-green.” The good news is that environmental groups, state legislators, the EPA, and the cleaning products industry are all working together to improve the products that you use every day. Although Green Cleaning has only been fashionable for the last decade or so, we have been working on developing more environmentally-sound cleaning products for more than 50 years.
The cleaning products industry has understood the importance of biodegradable cleaning products since the 1950s. In the 1970s, the industry removed all CFCs from aerosols. In the 1990s, products became more concentrated (“ultras”) which reduced packaging. Cleaning products have been getting “greener” through innovation and continuous improvement – long before the “green” movement was even around!
Courtesy of: aboutcleaningproducts.com
Tuesday, August 13, 2013
How to Keep Your Workplace and Home Allergy Free
1.) Increase carpet cleaning frequency: If the facility has carpet, ensure all vacuums are equipped with a High Efficiency Particulate Air (HEPA) filter. HEPA filters are most effective in the removal of the common contaminants that trigger asthma and allergies. In a commercial facility, deep clean carpets at least once a year. In facilities with high levels of foot traffic, consider deep cleanings on a more frequent basis.
2.) Maintain A/C and heating units: Each month, change air conditioning and heating unit filters to ensure dust mites don’t recirculate into the building. Consider using filter enhancers which can be sprayed on units to help trap more debris and allergens.
3.) Empty vacuums frequently: To ensure dust mites stay at a minimum, empty vacuum bags before they are full. When bags are roughly 1/3 to 1/2 full, empty them so vacuums can stay fully effective in the removal of dust mites and other debris.
4.)
Don’t rely on disinfectants: Often, facility managers believe that using a disinfectant will reduce asthma and allergy triggers. However, more intensive methods such as carpet cleanings, dusting and extraction are required to remove dust mites and other contaminants that prompt asthma attacks.
Asthma Triggers and how to Control them in the home:
1.) Dust Mites:
What You Can Do: Wash bedding in hot water once a week. Dry completely. Use dust proof covers on pillows and mattresses. Vacuum carpets and furniture every week. Choose stuffed toys that you can wash. Wash stuffed toys in hot water. Dry completely before your child plays with the toy.
2.) Cockroaches:
What You Can Do: Keep counters, sinks, tables, and floors clean and free of clutter. Clean dishes, crumbs, and spills right away. Store food in airtight containers. Seal cracks or openings around or inside cabinets. Use roach baits or traps instead of sprays. Cover trash cans.
3.) Mold:
What You Can Do: If you see mold on hard surfaces, clean it up with soap and water. Let the area dry completely. Use exhaust fans or open a window in the bathroom and kitchen when showering, cooking, or washing dishes. Fix water leaks as soon as possible to keep mold from growing. Dry damp or wet things completely within one to two days.
Chemical Irritants:
4.) Chemical Irritants:
What you Can Do: Chemical irritants found in some products in your house may make your child’s asthma worse. Your child’s asthma may be worse around scented or unscented products, including cleaners, paints, adhesives, pesticides, cosmetics, or air fresheners.
By following this advice, you will be able to create an environment that is free of asthma triggers in your home and at work.
2.) Maintain A/C and heating units: Each month, change air conditioning and heating unit filters to ensure dust mites don’t recirculate into the building. Consider using filter enhancers which can be sprayed on units to help trap more debris and allergens.
3.) Empty vacuums frequently: To ensure dust mites stay at a minimum, empty vacuum bags before they are full. When bags are roughly 1/3 to 1/2 full, empty them so vacuums can stay fully effective in the removal of dust mites and other debris.
4.)
Don’t rely on disinfectants: Often, facility managers believe that using a disinfectant will reduce asthma and allergy triggers. However, more intensive methods such as carpet cleanings, dusting and extraction are required to remove dust mites and other contaminants that prompt asthma attacks.
Asthma Triggers and how to Control them in the home:
1.) Dust Mites:
What You Can Do: Wash bedding in hot water once a week. Dry completely. Use dust proof covers on pillows and mattresses. Vacuum carpets and furniture every week. Choose stuffed toys that you can wash. Wash stuffed toys in hot water. Dry completely before your child plays with the toy.
2.) Cockroaches:
What You Can Do: Keep counters, sinks, tables, and floors clean and free of clutter. Clean dishes, crumbs, and spills right away. Store food in airtight containers. Seal cracks or openings around or inside cabinets. Use roach baits or traps instead of sprays. Cover trash cans.
3.) Mold:
What You Can Do: If you see mold on hard surfaces, clean it up with soap and water. Let the area dry completely. Use exhaust fans or open a window in the bathroom and kitchen when showering, cooking, or washing dishes. Fix water leaks as soon as possible to keep mold from growing. Dry damp or wet things completely within one to two days.
Chemical Irritants:
4.) Chemical Irritants:
What you Can Do: Chemical irritants found in some products in your house may make your child’s asthma worse. Your child’s asthma may be worse around scented or unscented products, including cleaners, paints, adhesives, pesticides, cosmetics, or air fresheners.
By following this advice, you will be able to create an environment that is free of asthma triggers in your home and at work.
The Carpet and Rug Institute
Monday, May 6, 2013
Spot Solver- Animal Stains
Act Quickly! Delaying may cause nthe spill tp become a permant stain. Blot liquids with a dry, white absorbent cloth or white paper towels. Gently scrape up semi-solids with a rounded spoon. Break up solids and vacuum.
* Pretest any spot removal solution (for color transfer to the cloth or damage to the carpet) in an inconspicuous area. If a change occurs, select another solution.
* Apply a small amount of the solution to a white cloth, and work in gently - do not rub -- working from the edges of the spill to the center to prevent spreading. Allow to remain on the spill a few minutes. Be patient. Blot.
* Continue to use the first agent as long as there is a transfer of the spill to the cloth. Be patient. Complete removal may require repeating the same step several times. Or, you may need to move to the next solution.
* When the spill is completely removed, rinse the area with cold water; blot with a dry cloth until all moisture is removed.
A dry, absorbent, cleaning compound may be used as a substitute to minimize drying time.
Detergent Solution - Mix one fourth (1/4) teaspoon of a liquid dishwashing detergent per one (1) cup of lukewarm water. NEVER USE A STRONGER CONCENTRATION! Thorough rinsing is necessary to remove detergent residues that may cause rapid soiling. It may be necessary to rinse with warm water several times to completely remove residues. (See Residue Precautions.) Care should be used in selecting a detergent. Never use a laundry detergent of any type, because laundry detergents may contain optical brighteners (fluorescent dyes) that dye the fiber. Do not select an automatic dishwashing detergent because many contain bleaching agents that destroy dyes and some fibers.
Vinegar Solution - Mix one (1) cup of white vinegar per two (2) cups of water. White vinegar is a 5% acetic acid solution. It is used most often to lower the alkalinity caused by detergent solutions or alkaline spills.
Warm Water - Lukewarm tap water should be used in most cases to rinse the cleaning solutions from the fiber. Failure to completely rinse the solutions from the fiber may cause accelerated soiling.
Ammonia Solution - Mix one (1) tablespoon of household ammonia per cup of water. Please note: Be aware that ammonia, if used improperly, can cause a color change. Be sure to test a hidden area.
Call a Professional - Professional cleaners have the ability and the equipment to use more aggressive cleaning solutions to remove stubborn spills. Always consider consulting a professional cleaner regarding any spot removal question.
Courtsey of : The Carpet and Rug Institute
* Pretest any spot removal solution (for color transfer to the cloth or damage to the carpet) in an inconspicuous area. If a change occurs, select another solution.
* Apply a small amount of the solution to a white cloth, and work in gently - do not rub -- working from the edges of the spill to the center to prevent spreading. Allow to remain on the spill a few minutes. Be patient. Blot.
* Continue to use the first agent as long as there is a transfer of the spill to the cloth. Be patient. Complete removal may require repeating the same step several times. Or, you may need to move to the next solution.
* When the spill is completely removed, rinse the area with cold water; blot with a dry cloth until all moisture is removed.
A dry, absorbent, cleaning compound may be used as a substitute to minimize drying time.
Detergent Solution - Mix one fourth (1/4) teaspoon of a liquid dishwashing detergent per one (1) cup of lukewarm water. NEVER USE A STRONGER CONCENTRATION! Thorough rinsing is necessary to remove detergent residues that may cause rapid soiling. It may be necessary to rinse with warm water several times to completely remove residues. (See Residue Precautions.) Care should be used in selecting a detergent. Never use a laundry detergent of any type, because laundry detergents may contain optical brighteners (fluorescent dyes) that dye the fiber. Do not select an automatic dishwashing detergent because many contain bleaching agents that destroy dyes and some fibers.
Vinegar Solution - Mix one (1) cup of white vinegar per two (2) cups of water. White vinegar is a 5% acetic acid solution. It is used most often to lower the alkalinity caused by detergent solutions or alkaline spills.
Warm Water - Lukewarm tap water should be used in most cases to rinse the cleaning solutions from the fiber. Failure to completely rinse the solutions from the fiber may cause accelerated soiling.
Ammonia Solution - Mix one (1) tablespoon of household ammonia per cup of water. Please note: Be aware that ammonia, if used improperly, can cause a color change. Be sure to test a hidden area.
Call a Professional - Professional cleaners have the ability and the equipment to use more aggressive cleaning solutions to remove stubborn spills. Always consider consulting a professional cleaner regarding any spot removal question.
Courtsey of : The Carpet and Rug Institute
Thursday, April 25, 2013
Troubleshooting Common Carpet Issues
Information for Maintaining Carpet Appearance...
> Courtesy of The Carpet and Cleaning Institute
>Texture surface retention:
Carpet in heavily traveled areas receives the most wear. For better appearance and longer carpet life, try to reduce the amount of traffic on these areas or use small rugs in front of heavily used chairs or furniture. Remove and clean these rugs while vacuuming the primary carpet or rug. You should occasionally move furniture and reverse area rugs. Although some change will eventually occur in the texture of your carpet, reducing the wear on paths and in front of furniture will slow this change.>Crushing:
Crushing is the loss of pile thickness because of foot traffic. Crushing is not considered a manufacturing defect unless it is specifically cited in the manufacturer’s warranty. Regular vacuuming may help reduce crushing that results from traffic. Manufacturers’ definitions of crushing may vary.>Depressions or indentations:
The weight of heavy pieces of furniture can cause indentations in carpet. Some depressions may be permanent. Use furniture glides or cups under the legs of heavy pieces, or move your furniture a few inches backward or sideways so that the weight is not concentrated in one place. To remedy depressions, work the carpet pile back into place with your fingertips or the edge of a spoon, then, dampen the area and heat it with a hair dryer, working the fibers with your fingers or a spoon.>Fading or color loss:
Give your carpet the normal protection from direct sunlight that you would give to any colored fabric. Emissions from heating systems or chemicals, such as pesticides, household cleaning agents and other household items, can also result in color loss.>Filtration soil:
Filtration soil may appear as dark or grayish lines on carpet along walls, stairways and under doors. It is caused by airflow over and through carpet, allowing fine soils to settle on the surface. It is often caused by an improperly balanced ventilation system, when the volume of air entering a room exceeds the system’s capacity to remove air from the room. Excess air then seeks exit sources in gaps along walls and stairways. Prevent the airflow through carpet and carpet edges by sealing openings through the carpet and under doors and baseboards. Keeping the air in the area clean and using good filtration in your heating and cooling systems and vacuum cleaners can help. Filtration soils may require special cleaning treatment for effective removal. Contact a carpet-cleaning professional for assistance.> Courtesy of The Carpet and Cleaning Institute
Thursday, April 18, 2013
Clearing The Air
Asthma and allergies: Although we might not normally
associate carpet with improved indoor air quality, it does have a very positive
effect. Gravity causes common household particles, such as dust, pollen and pet
and insect dander, to fall to the floor. Carpet fibers trap the particles,
reducing their continued circulation in the air. Proper cleaning with CRI-approved vacuums effectively removes dust and allergens from the carpet, locks them
in the machine and helps keep them out of the air we breathe.
A misperception is that people with asthma and allergies should avoid carpet in the home. But much of today’s carpet is made from harmless materials found in clothing and other everyday fabrics, such as polyester, nylon, triexta, and olefin fibers, which don’t trouble most people.
Mold and VOC misperceptions: Other misperceptions about carpet involve mold and the emission of volatile organic compounds, or VOCs. In fact, it is very hard to grow mold on carpet. Mold grows in any moist environment where dirt and dust provide nutrients. When carpet is kept clean and dry, mold simply cannot grow on synthetic fibers.
Carpet is also wrongly linked to high VOC levels. Scientific studies show that new carpet is one of the lowest emitters of VOCs into the indoor environment, and that these emissions dissipate very quickly. The low-level VOC emissions and the harmless odor from new carpet disappear within the first 48 to 72 hours after installation and even sooner with open windows or doors.
The Carpet and Rug Institute offers Green Label testing and certification to indicate carpet, carpet backings, cushions and adhesives that emit low VOCs.
~ Courtsey of The Carpet and Rug Institute
A misperception is that people with asthma and allergies should avoid carpet in the home. But much of today’s carpet is made from harmless materials found in clothing and other everyday fabrics, such as polyester, nylon, triexta, and olefin fibers, which don’t trouble most people.
Mold and VOC misperceptions: Other misperceptions about carpet involve mold and the emission of volatile organic compounds, or VOCs. In fact, it is very hard to grow mold on carpet. Mold grows in any moist environment where dirt and dust provide nutrients. When carpet is kept clean and dry, mold simply cannot grow on synthetic fibers.
Carpet is also wrongly linked to high VOC levels. Scientific studies show that new carpet is one of the lowest emitters of VOCs into the indoor environment, and that these emissions dissipate very quickly. The low-level VOC emissions and the harmless odor from new carpet disappear within the first 48 to 72 hours after installation and even sooner with open windows or doors.
The Carpet and Rug Institute offers Green Label testing and certification to indicate carpet, carpet backings, cushions and adhesives that emit low VOCs.
~ Courtsey of The Carpet and Rug Institute
Tuesday, April 9, 2013
Caring For Your Carpet
1. The Virtues of Vacuuming:
The carpeting in your home is the perfect place for dirt, dust and other potentially harmful particles to hide. Vacuum the carpet in your home at least once per week, more frequently in high traffic areas like your family room or entrance way. By vacuuming on a regular basis, the life of your carpet is extended by preventing the dirt and particle build-up that wears down carpet fibers. For hard to reach places like underneath furniture and around baseboards, use your vacuum’s attachments every few weeks.
2. Slow Down and Sweep it All Out:
Even though your carpeting may not appear to be dirty, remember that millions of dirt and dust particles can be hiding deep within the carpet fibers. Many people vacuum too fast to really collect all of the dirt collected in their carpeting. Slow down a bit, and you’ll be able to sweep up a lot more of the particles that are hidden from the naked eye. It won’t take much extra time, but your carpets will look better and wear longer.
3. Crisscross Your Way to Cleaner Carpeting
High traffic areas where people sit and move their feet are some of the most important places to vacuum thoroughly. Go over these places a few times using a crisscross pattern to ensure that your carpet is really getting clean.
4. Fight the Dirt Before it Starts:
Whether you’re getting new carpet or just had your existing carpets cleaned, consider using soil retardants to keep your entire home looking pristine. While this can be done on your own, we recommend using professional equipment or having a qualified company apply the soil retardants for you. Soil retardants act like a shield against dirt and dust particles that will protect them for years to come.
Courtesy of: Clean Home IdeasWednesday, March 27, 2013
Upholstery Cleaning Tips
Friday, March 22, 2013
Simple methods for special carpet problems
Ever wondered how to fix carpeting that has been burned,stained or discolored? Try one of these simple methods to restore your carpet to its former glory.
> If you used a spot remover that altered the color of your carpet, try using artists' acrylic paint to touch up the affected area. Or, you can use a felt-tip marker or a permanent-ink marker of the appropriate color.
> To repair a small burned area, snip off the charred fibers and put white glue in the opening. Then snip fibers from a scrap piece of carpet or from an inconspicuous part of the carpet. When the glue gets tacky, poke the fibers into place.
> To repair a large carpet burn, simply cut out the damaged area and subsitute a patch of identical size and shape securing the piece with latex adhesive.
> If a carpet thread is loose, snip it level with the pile. Do not pull on it as you will run the risk if unraveling part of the carpet.
Editors of Consumer Guide
TLC Home
> If you used a spot remover that altered the color of your carpet, try using artists' acrylic paint to touch up the affected area. Or, you can use a felt-tip marker or a permanent-ink marker of the appropriate color.
> To repair a small burned area, snip off the charred fibers and put white glue in the opening. Then snip fibers from a scrap piece of carpet or from an inconspicuous part of the carpet. When the glue gets tacky, poke the fibers into place.
> To repair a large carpet burn, simply cut out the damaged area and subsitute a patch of identical size and shape securing the piece with latex adhesive.
> If a carpet thread is loose, snip it level with the pile. Do not pull on it as you will run the risk if unraveling part of the carpet.
Editors of Consumer Guide
TLC Home
Monday, March 18, 2013
Frequently Asked Questions...
How long do I have to wait until my
carpets are dry?
Your carpets
should be dry within 4-6 hours, however, factors such as humidity, temperature
and the flow of air can extend the drying time. To help accelerate the drying
time, use fans or turn on your air conditioner or heating system. Please
remember to keep the protective blocks under your furniture until your carpet
is completely dry to avoid any color transfer.
How can I keep my carpet looking
fresh after cleaning?
Regular
vacuuming will help your carpet stay clean and fresh. We recommend that your
carpets be professionally cleaned twice a year.
Why should I use a stain protectant?
Most carpets
come from the manufacturer with stain protection, but that reduces in
effectiveness over time. CarpetUp’s 3M Scotch Guard protectant refreshes the
performance of stain resistant carpets and can help your carpet resist soiling
from dirt, oil and water based spills. The protectant also will give you more
time to remove spills before staining can occur.
Do you move furniture?
Yes, we do
move furniture. It would be helpful to us if you removed any items on tables,
etc. to a secure location. We suggest it is not feasible to move such large
items as pianos, big screen televisions, waterbeds, dressers with attached
mirrors, china cabinets and the like.
Do I need to vacuum my carpets before
the professionals arrive?
There is no
need to vacuum before we arrive. If needed, our technicians can pre-vacuum the
area that needs to be cleaned.
Do you guarantee the removal of all
stains on my carpets?
While we
would like to say yes, the reality is that there are some substances that can
permanently discolor fabric fibers.
Do you have a customer satisfaction
guarantee?
Yes, all our
work comes with a 100% satisfaction guarantee. If you are unhappy with any part
of our work, simply call us with 24 hours and we will return to address those
areas of concern at no cost to you.
Friday, March 8, 2013
Common Carpet Cleaning Myths
Myth # 1... Wait as long as you can to have your carpet cleaned the first time, because once you have it cleaned it never looks the same again.
First of all, if you wait too long to have your carpet cleaned, there has already been permanent damage done to the fibers. The main reason for this belief can be attributed to carpet cleaners who leave the carpet either too wet, full of residue, or both. Too wet leaves suspend soils in the excessive moisture. When it dries, this soil will wick up to the top surface of the carpet fiber. Remaining residues leave fibers unclean which will attract new soils quickly, whether the carpet has been wet or dry cleaned.
Proper analysis of carpet prior to cleaning is needed to determine the correct method of cleaning. This needs to be done by a professional whose main concern is doing the job properly, no matter how much time it takes.
If your carpet is cleaned properly, there will be maximum removal of residues, quick drying, and a fresh clean carpet under your feet for months to come.
Myth # 2... The store where we purchased our carpet said it had to be dry cleaned only.
We hear this one a lot. This could not be further from the truth.
This consensus of opinion among carpet retailers (salespeople) is derived from carpet cleaners who consistently leave the carpet too wet. This causes a great amount of soiling to be left behind, which wicks back to the surface after drying finally occurs. This opinion has no factual or proven claims to back it up, it is just that — their opinion, and it is WRONG!
Shaw Industries, the largest manufacturer of carpet in this country, states that hot water extraction is their recommended method of carpet cleaning. They also recommend PROFESSIONAL carpet cleaning using this method. This would include someone who has proof of complete training, an established track record of professional ethics and necessary training, and a price that is NOT too good to be true!
If your retailer says dry cleaning only, challenge them and ask for written proof of such claims on their part. More than likely you will leave them going into their double-talk speech routine to give you an (incorrect) answer.
Myth # 3... If I have my carpet steam (wet or hot water extraction) cleaned, it can shrink, mold, mildew,split at the seams or otherwise ruin my carpet.
Again, this can only happen if the cleaner leaves the carpet extremely wet. In the case of a professional, removing all excess moisture is one of the most important steps in the hot-water extraction (steam) cleaning process.
Modern hot water extraction equipment is designed to do just that — remove all excess moisture and leave only what the carpet fiber itself will absorb.
A professional carpet cleaning company will properly use this cleaning process which only penetrates to the base of the carpet fiber, and does not penetrate the carpet backing (either primary or secondary), pad, or your floor underneath.
Even some of the dry cleaning companies actually use water, so it is not dry at all.
www.perfection-carpet.com
www.perfection-carpet.com
Subscribe to:
Posts (Atom)












